Woodworking Articles


My carved owl with a bald eagle friend
After completing my first carved owl masterpiece, I decided to give it another shot. This time I opted for another owl but larger and more intricate than the first. Here’s what I ended up with: The basic design for the owl came from an image I found online. I converted the image to a black and white […]

Carved Owl Version 2


Brand new weatherproof shed doors
When confronted with dilapidated shed doors, one can opt to either repair or replace. In the case of the doors shown below, I opted for replacement. These doors were probably 20 to 30 years old and in dire need of TLC.  They were made from T1-11 plywood and painted a garish, ugly primer red that contrasted […]

New Shed Doors



Could American chestnut be the wood of choice for future generations of woodworkers? Well, I’m not quite ready to make that prediction but there is reason for optimism. As some of you may know, chestnut was one of the dominant tree species in the eastern forests of North America a hundred years ago. It’s estimated that in the early […]

American Chestnut – Down But Not Out


Damaged groove caused by impatient routering 1
In this installment of Woodworking Damage Control, the challenge was to repair a groove that got away from me. While making some wine totes, I was using a router bit to cut grooves along the inner face of each side to accommodate a plywood base.  The problem was that I got a bit impatient and tried removing too […]

Groove Damage Control



Two-bottle wine tote made from wormy cherry
To help pass those slow winter months after the holiday season, I decided to make some wine totes (aka caddies) using some cherry lumber stored for many years in the family barn in PA. The wood was well seasoned and appeared to be in good condition.  However, after surface planing, instead of finding nice clear material, I […]

Wormy Cherry Wine Tote


Side view of install vise 7
Can you imagine not having a vise on your workbench? Me neither. Yet, somehow I scraped by for many years before finally installing one and now I can’t imagine not having it. I bought a Jorgensen model 41012 vise from a fellow woodworker who bought it some years ago but never got around to installing it. It […]

Installing a Front-Mounted Workbench Vise



From basswood blank to carved owl
After receiving a wood carving kit for Christmas, I decided to usher in the new year with a carving project. As a relative neophyte with only one other carving project under my belt, I spent a bit of time online looking for a suitable beginner’s project and I eventually found plans for a “3-to-5 minute owl” at […]

New Years Carved Owl


Woodshop storage cabinet 4
For a number of years, I stored screws, bolts, and nails in a corner of my shop using a bunch of plastic bins mounted on horizontal plastic rails. This worked well enough in that the hardware was always close at hand but I got tired of all the dust that eventually coated everything. Not only […]

Woodshop Storage Cabinet



Shelf deflectometer in woodshop 5
I call this apparatus a shelf deflectometer. It’s used to measure shelf deflection or sag in order to test various shelf construction and loading parameters. (I would call it a “sagometer” but there’s already a device by that name used to measure sag in electrical power lines). The impetus for building it was to facilitate […]

Shelf Deflectometer


Step 2: cut half piece of sandpaper in half
The 1-2 method Here’s a simple jig for cutting 9″ x 11″ sheets of sandpaper into fourths for use with a 1/4 sheet palm sander. It makes quick work out of a potentially tedious task thanks to two spacer blocks: one for cutting the sandpaper in half and another for cutting the halves in half […]

Sandpaper Cutting Jig



Homemade leg leveler
What to do when you need to level a woodshop table but don’t have any levelers handy? You make them from scratch. That was the situation I found myself in when I built a new outfeed table for my table saw. Because my shop floor was not quite level (are they ever?), I needed a […]

DIY Woodshop Leg Levelers


Fold down outfeed table 1
Introducing table saw outfeed table v2, a slimmed down, simplified version of its predecessor. It features a relatively small footprint (24″ x 32″), miter slots, and the ability to fold down when the removable legs are removed. It also provides clearance for the back support mechanism of the rip fence. The version one outfeed table […]

Fold Down Table Saw Outfeed Table






Quick and inexpensive table top fastener
If you’re looking for an alternative to metal table hold-down fasteners, or don’t have any fasteners readily available, consider making your own using some scrap wood and a biscuit joiner. I made a number of such fasteners for a cherry coffee+end table project and was fairly pleased with the results. They keep the table top […]

DIY Table Top Fasteners


Restored turtle top table
I came across this turtle top table while cleaning out the attic in the home where I grew up. I remember my mom working on the table many years ago – she had partially stripped off the finish as the first step in reviving the table but didn’t get around to finishing the job. Eventually, […]

Restoring a Turtle Top Table



Sycamore display case made from a single board
While at the lumber yard picking out some wood for a bygone project, I came across some sycamore with an awesome grain pattern that really caught my attention. On impulse, I bought a single board of the sycamore figuring that I would find something to make from it. After watching it collect dust in my […]

Sycamore Display Case


Student desk with bookshelf unit and matching chest of drawers
This desk was inspired by a plan in Issue #62 of Woodsmith magazine. It’s a fairly simple design, consisting of a three drawer pedestal, a top writing surface and side panel. The desk is lightweight, relatively small (24″ x 48″ by 29″ high), and has a clean, contemporary look to it (some might even say […]

Student Desk