Bill Kovalick


While building several sets of cornhole boards, I needed a way to create an evenly-spaced painted ring around the hole. That’s when I decided to build this “compass cutter”, which is essentially an over-sized compass with a blade in place of a pencil. It’s used like a normal compass but instead of drawing a line, […]

Compass Cutter


I wish I had made this plywood cutting table a long time ago. It makes quick work of breaking down a piece of plywood into more manageable sizes, especially if using a track saw. Perhaps the best feature of the table is that it is portable, allowing it to be assembled in an area with […]

Plywood Cutting Table



The Dewalt Track Saw has a unique advantage over other track saws: a double-sided rail – a rubber edge strip on both sides –  which allows cutting along both sides of the rail. This means there’s no need to flip the track around to cut from the opposite direction and the overall life of the […]

Dewalt Track Saw Crosscut Table




This simple router circle cutting jig was made from a piece of left-over 7/16″ PVC board that I found in the scrap bin.  My impetus for building it was that I needed to cut 6″ wide holes for several corn hole game sets and I decided that the manual scroll saw approach with resultant wavy edges […]

Router Circle Cutting Jig


The requirements for this wishing well were rather simple: it had to be relatively compact but large enough to cover an unsightly well pipe, but also inexpensive and easy to make. Of course, I also wanted it to look half-decent. I think I succeeded on all counts. The well was built over the course of a […]

Simple Wishing Well



Here is a nifty calculator for making items via splayed joinery that was graciously provided by Gerald R. What exactly is “splayed joinery” you say? Well imagine a tube made from multiple pieces of wood (staves) in which one end of the tube is larger in diameter than the other. An example is a tapered round […]

Stave Calculator for Splayed Joinery


Seagull on pier intarsia
I’ve been dabbling with intarsia for the last few months and it’s been quite the learning experience. If you’re not familiar with intarsia, it refers to a woodworking technique/art form that involves inlaying different pieces of wood to create a pseudo 3-D picture. It relies on the natural variations in wood grain and color to create the […]

Getting Started with Intarsia







Garden bench from reclaimed redwood lumber
My big project over the latter part of winter was this outdoor bench made from reclaimed redwood. The lumber for the bench came from an older, weather-beaten bench that had been exposed to the elements for 20+ years.  When I realized the bench was made from relatively expensive and rare redwood (possibly old-growth), I decided it […]

Reclaimed Redwood Bench



Epoxy is activated by mixing 2 parts resin to 1 part hardener 1
Penetrating epoxy has been used for years to seal and repair wooden parts on boats but it also has value in protecting outdoor wooden furniture from the elements. It’s designed to be applied to bare wood where it soaks into the wood, filling the small gaps in the wood surface and creating an impenetrable moisture barrier. […]

Penetrating Epoxy


"I can't believe I ate the whole thing..." 6
When I built this cedar bird house last year, I was hopeful that it would attract blue birds or some other colorful song birds. So I was somewhat excited to see a “bird” sticking his head out of the house as I was doing some yard work recently. But as I got closer to the house I realized the bird was […]

Frogs in the Bird House



Side-by-side comparison of Milwaukee and Ryobi adapters
More than once I’ve found myself in a situation where I needed to drill a hole or insert a screw in a hard-to-reach location but lacked the technology to easily accomplish the task in a satisfactory manner. Typically, these are situations where there is insufficient room to position the drill directly over the hole so I usually resort to […]

Milwaukee and Ryobi Angled Drill Adapters





Setting up the jig to cut the tenon cheeks
An angled mortise and tenon joint can be a challenge to cut, especially for those of us who don’t make such joints on a regular basis. That’s where a jig comes to the rescue. Here’s a quick and dirty “semi-adjustable” jig that can be built in a half hour or less that simplifies the task […]

Angled Tenon Jig